Hangzhou Huiwei Nondestructive Equipment Co.,Ltd,
Hangzhou Huiwei Nondestructive Equipment Co.,Ltd,
Add to Cart
200kv X Ray Welding NDT Machine From China Factory for Wholesale
X Ray NDT Equipment/ NDT Radiographic Testing/NDT Flaw Inspection
Introduction
The industrial ndt x-ray equipment use to evaluate the quality of materials and products since the industrial ndt x-ray equipment can be used to show the internal defects of materials,products or welding from a radiographic image on a film. According to the principle of the different absorption of the x-ray for different material depending on the different thickness of the materials.
Application
This industrial ndt x-ray equipment can be widely used in shipbuilding, machinery, manufacturing, aviation, rail, pressure vessels, boilers, oil, chemical, defense industry and other departments for non-destructive testing. Particularly applicable to construction site operation and high-altitude operations.
RD-1803T the technical parameters
|
| Item | RD-T200 |
| Input | Input power | AC220V± 10% 50Hz |
|
| Power capacity | Not less than 2.0 KVA |
| Output | X-ray tube voltage | 100~ 200 KVp |
|
| X-ray tube current | 3mA |
|
| mA stability | ± 1% |
| Ray tube | Focus size (mm) | 1.5× 1.5 |
|
| Radiation angle | 45±5° |
| Radiation generator | Working pressure Cooling method Insulation method | 0.45MPa ~ 0.5Mpa Anode grounded radiator, strong air cooling Gas insulation SF6 |
|
| Dimensions Weight (kg) | Φ200mm´635mm(Including end rings) |
|
|
| 15 |
| Maximum penetration | Thickness Steel A3 (mm) | 25(5min) |
|
| Conditions | Focal length 600mm, Agfa film, double-sided lead foil sensitization, solution temperature 22 degrees, film blackness ≥ 1.5 |
|
| Sensitivity | Better than 2% |
| Controller | Dimensions Weight Circuit | 350mm×265mm×200mm < 8(kg) Automatic control and protection |
| Environment | Operating temperature Relative humidity Altitude | -30°~ +40° No more than 85% No more than 1500 meters |
| Method | Fully automatic 1:1 mode of work and rest, the longest continuous exposure time is 5 minutes | |
FAQ
Q1. Are you a factory or a trading company?
We are a factory with 35 years of experience.
Q2. What's the MOQ ?
(1). Normally, MOQ is 1 piece. The quantity is depending on the clients’ needs.
(2)According to customer order, the quantity still can be negotiated and we will product immeditaly if we dont have stock.
Q3. What is your principle for the samples ?
No free samples. But we provide 1piece as a sample order for all items.
Q4.Which payment can be acceptable ?
We could accept the payment by T/T, Paypal, Western Union,L/C, etc.
Q5. How about the lead time?
If no stocks, it takes 7 to 15 working days to manufacture after receiving the advance payment.
If in stock, 2-4 working days are possible. But it depends on the exact products and quantity.